Rider PRO children's skihelmet blue

Etape Rider PRO a modern ski helmet conceived for children provides a proper head protection to your kid and strength its selfconfidency as well. An outer helmet´s shell is made by InMold technology. This technology provides a high shock sustainability of the helmet when accident happen. InMold technology inpressed a hard outer shell to the polystyrene skelet, it provides an excelent shock absorbtion ability yet overal low weight. Air circulation is provided by twelve vent holes that regulated and keep your comfort during warm and sunny weather especially. It is easy to put on the helmet and adjust it to your head size due to QFS (quick fit system) regulation. For tighter fastening turn a hand-barrow right, for releasing, turn it left. It gives you comfort as well as proper protection due to the fastening system. Rider PRO is equiped with anti-scratch visor with mirror effect, 100% UV protection, ZeroFog technology and S2 filter for sharper vision and pure ski experiences. Rider PRO the helmet is designed according to EU standards EN 1077. If your children are going to ski, they should be have a proper equipment. Rider Pro the helmet is the right one for them.

Maintenance: Use clear water and soft textile to visor wiping. Wash inner pad by hands up to 40° C temperature with mild soap, do not use chemical, do not dry, do not iron.

Rider PRO:
- for head circumference 53 - 55 cm
- InMold technology
- 12 vent holes
- QFS fastening
- weight: 490 g
- orange visor with S2 filter
  blue visor with S2 filter
- mirror effect
- 100% UV filter
- anti-scratch visor
- ZeroFog
- carry bag included

O značce Etape

The ETAPE brand has been operating on the Czech market since 1998, which is more than 15 years. Etape brand products are best characterized by the words - functionality, quality and design. The combination of these three elements is common to all Etape products and the reason why Etape products are so popular among athletes. Maximum attention is paid to the selection of suitable materials and also to the perfect cut. In the case of helmets, spine protectors and goggles, safety and comfort are the main criteria.